Note: The Subnet Mask tells you what part of the default gateway IP address is the Subnet, and what part is the Host. In the command prompt, enter the command ipconfig. Look at the resulting output, and note your Subnet Mask and Default Gateway values. Note: If this does not work, see Microsoft: Command Prompt FAQ for more details.ģ. Doing this varies between Windows versions, but usually click the Start button and type cmd in the Search programs and files box. Connect a computer to the existing LAN. Ensure you have internet access.Ģ. You will have to change the IP address of the AP if the AP default IP address is in a different subnet than your LAN network.ĭiscover the IP subnet of the existing LAN:ġ. Click a device to see the user manual and installation guide. The default IP address of your AP will be on a sticker on the rear or bottom of the AP. This list below shows some models of NETGEAR Access Point, and their default IP address.
This document talks about configuring the Access Point (AP) to be in the same IP subnet as the network, and is intended for first time users. The following article is intended to assist with the installation of a NETGEAR Access Point on an existing LAN network.